Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD96L6384

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD96L6384


>> Download MSA5TCD96L6384 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                                   6-2
                     10. Front Wiper and Washer - 11. Rear Wiper and Washer


          3) Check wiper motor for proper stoppage.
          Connect battery to wiper motor. After operating wiper motor
          at low speed, disconnect battery to stop it.




B6M0165


          4) Reconnect battery and ensure that wiper motor stops at
          "AUTO STOP" after operating at low speed.




B6M0166

          3. WASHER MOTOR
          Apply battery voltage between terminals of washer motor
          connector and check that washer motor operates.




B6M0111


          11. Rear Wiper and Washer
          A: ON-CAR SERVICES
          1. ADJUSTMENT
          1) Adjust wiper blade in original position as shown in fig-
          ure by changing wiper arm installation.
          Original position:
             A: 25 -- 35 mm (0.98 -- 1.38 in)
G6M0126


          2) Adjust washer ejecting point on rear gate window as
          shown in figure when the vehicle stops.
          Ejecting point:
             A: 25 mm (0.98 in)
             B: 200 -- 300 mm (7.87 -- 11.81 in)




G6M0127




                27
6-2                            SERVICE PROCEDURE
11. Rear Wiper and Washer


                                       B: REMOVAL AND INSTALLATION
                                       1. BLADE
                                       Pull out blade following the arrow direction, from arm while
                                       pushing up locking clip.




                            B6M0107A


                                       2. WIPER ARM
                                       1) Remove head cover.
                                       2) Remove nut and wiper arm.
                                       Tightening torque:
                                          5.9



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo