Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD96L6254

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L6254 documenatation <<

Text preview - extract from the document

4-7                                    SERVICE PROCEDURE
12. Condenser - 13. Receiver Drier


                                               NOTE:
                                               After installing condenser, ensure that guide on lower side
                                               of condenser is inserted into hole in radiator panel. Tighten
                                               attaching bolts.
                                               9) Charge refrigerant. 




                                               B: INSPECTION
                                               1) Make sure the condenser fins are free from dust and
                                               insects. If the fins are clogged, clean by blowing air or
                                               water through them.
                                               NOTE:
                                               To prevent dust and water from getting into the condenser,
                                               this work must be done when the condenser is installed in
                                               an actual vehicle.
                                               2) Check the condenser to see if it shows any sign of oil.
                                               Should oil ooze or gas leak from the condenser replace it
                                               with a new one.




                                               13. Receiver Drier
                                               A: REMOVAL AND INSTALLATION
                                               1) Disconnect battery negative terminal.
                                               2) Discharge refrigerant using refrigerant recovery system.
                                               
                                               3) Disconnect pressure switch harness k .    1
                                               4) Disconnect pipes k . 2
                                               5) Remove mounting bolt k and remove receiver drier.
                                                                              3
                                     G4M0640   CAUTION:
                                               The receiver drier contains a desiccant. Be sure to put
                                               a blind plug in the detached receiver drier to protect it
                                               from moisture.
                                               6) Install the receiver drier in the reverse order of removal.
                                               7) Charge refrigerant. 




                                                     36

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo