Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD96L6207

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD96L6207


>> Download MSA5TCD96L6207 documenatation <<

Text preview - extract from the document
                      SERVICE PROCEDURE                                                   4-4
16. ABS Control Module (Except ABS 5.3 Type)- 17. G Sensor for ABS System (Except ABS 5.3 Type)


                              B: INSPECTION
                              Check that connector is connected correctly and that con-
                              nector terminal sliding resistance is correct.




                              C: INSTALLATION
                              1) Connect connector to ABS control module.
                              2) Install ABS control module on the body.




                   G4M0469


                              17. G Sensor for ABS System (Except
                              ABS 5.3 Type)
                              A: REMOVAL AND INSTALLATION
                              The G sensor is located on the right front wheel apron.




                   G4M0470


                              B: INSPECTION
                              1) Check to ensure that G sensor is securely installed on
                              front wheel apron, and that connector is properly installed.
                              2) Disconnect connector from G sensor and measure con-
                              tact resistance between terminals.
                               Condition of G sensor           Standard
                               On flat surface                 610



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo