Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD96L6214

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD96L6214


>> Download MSA5TCD96L6214 documenatation <<

Text preview - extract from the document
4-4                                    SERVICE PROCEDURE
24. G Sensor for ABS System (ABS 5.3 Type)


                                               24. G Sensor for ABS System (ABS 5.3
                                               Type)
                                               A: REMOVAL AND INSTALLATION
                                               1) Turn ignition switch to OFF.
                                               2) Remove console box. 
                                               3) Disconnect connector from G sensor.




                                               4) Remove G sensor from body.
                                               5) To install, reverse the removal procedure.
                                               CAUTION:
                                               Do not drop or bump G sensor.




                                     B4M1011


                                               B: INSPECTION
                                               1. USING CIRCUIT TESTER
                                               1) Turn ignition switch to OFF.
                                               2) Remove G sensor from vehicle.
                                               3) Connect connector to G sensor.
                                               4) Turn ignition switch to ON.
                                               5) Measure voltage between G sensor connector termi-
                                               nals.
                                                      : Connector & terminal
                                     B4M0915
                                                         (P9) No. 2 (+) -- No. 1 (-)
                                                         Is voltage 2.3



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo