Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual MECHANICAL COMPONENTS SECTION HEATER AND VENTILATOR MSA5TCD96L6235

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L6235 documenatation <<

Text preview - extract from the document

4-6                       SERVICE PROCEDURE
5. Intake Door Motor


                                  5. Intake Door Motor
                                  A: REMOVAL
                                  1) Disconnect GND cable from battery.
                                  2) Remove glove box and pocket back panel. 
                                  3) Remove heater duct or evaporator. (With A/C model).
                                  

                        B5M0025


                                  4) Remove intake unit from the vehicle.




                       G4M0561


                                  5) Remove screws which secure intake door motor to
                                  intake unit.
                                  NOTE:
                                  Ensure that RECIRC switch is set to "ON".




                       G4M0562


                                  B: INSPECTION
                                  1) When approx. 12 V is applied to the intake door motor
                                  terminals, intake door motor operates as follows:
                                  LHD model
                                    Intake     Terminal
                                  door motor                   Intake door motor operation
                                   position
                                    FRESH             2   Door motor moved to FRESH position.
                                               3
                       B4M0294A    RECIRC             1   Door motor moved to RECIRC position.
                                  RHD model
                                    Intake     Terminal
                                  door motor                   Intake door motor operation
                                   position
                                    FRESH             1   Door motor moved to FRESH position.
                                               2
                                   RECIRC             3   Door motor moved to RECIRC position.




                                       16
  SERVICE PROCEDURE                                                 4-6
                                                     5. Intake Door Motor


          2) Connect harness to intake door motor.
          3) Turn ignition switch to "ACC" and RECIRC switch to
          "ON" then, set to "RECIRC".
          NOTE:
          Ensure that intake door motor is set in the "RECIRC" mode.
          4) Install intake door motor on intake unit.
          5) Secure rod holder to link, and install link to intake unit.
          6) Manually set rod in the "RECIRC" mode, and secure to
          rod holder.
G4M0564
          7) Operate mode selector switch to ensure that system
          changes from intake air to "RECIRC" and from "RECIRC"
          to intake air in full-stroke range.




          C: INSTALLATION
          Installation is in the reverse order of removal.




                17

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo