Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD96L6105

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L6105 documenatation <<

Text preview - extract from the document

  SERVICE PROCEDURE                                                3-2
                                                    8. Drive Pinion Shaft


          8. Drive Pinion Shaft
          A: DISASSEMBLY
          1) Straighten the staked portion of the lock nut, and
          remove the lock nut while locking the rear spline portion of
          the shaft with ST1 and ST2. Then pull off the drive pinion
          collar.
          ST1 498937100 HOLDER
          ST2 499787100 WRENCH
G3M0458   NOTE:
          Remove the O-ring




          2) Using a press, separate the rear roller bearing and
          outer race from the shaft.




G3M0459


          3) Using a press and ST, separate the front roller bearing
          from the shaft.
          ST     498517000 REPLACER




G3M0460


          B: INSPECTION
          Make sure that all component parts are free of harmful
          cuts, gouges, and other faults.




                93
3-2                       SERVICE PROCEDURE
8. Drive Pinion Shaft


                                  C: ASSEMBLY
                                  1) Measure dimension "A" of the drive pinion shaft.




                        G3M0461


                                  2) Using a press, force-fit the roller bearing in position.
                                  CAUTION:
                                  Do not change the relative positions of the outer race
                                  and bearing cone.
                                  3) After fitting the O-ring to the shaft, attach the drive pin-
                                  ion collar to the shaft.
                                  CAUTION:
                                  Be careful not to damage the O-ring.
                        G3M0462


                                  4) Tighten the lock washer and lock nut with ST1.
                                  ST1 498937100 HOLDER
                                  Actual tightening torque:
                                      113

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo