Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD97L3781

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3781 documenatation <<

Text preview - extract from the document

   SERVICE PROCEDURE                                               5-1
                                                                 1. Hood


           1. Hood
           The hood lock has a dual locking design which consists of
           a main lock and a safety lock mechanism. When the
           release knob located at the front pillar on the driver's side
           is pulled back, the main lock is released through the cable
           attached to the knob.
           The safety lock can be released by pushing the lever pro-
           truding above the front grill while opening the hood.



           A: REMOVAL
           1.   HOOD
           1)   Open front hood, and remove washer hose.
           2)   Remove attaching bolts.
           3)   Detach front hood from hinges.



G5M0137

           2. HOOD LOCK
           1) Open front hood and remove front grille.
           2) Remove bolts which secure lock assembly to radiator
           panel, and remove lock assembly.
           3) Disconnect release cable from lock assembly.




 B5M0267


           3. RELEASE CABLE
           1) Remove front grille.
           2) Remove release cable from opener lever in passenger
           compartment.
           3) Remove release cable from lock assembly.
           4) Remove cable clip from engine compartment.



 B5M0319

           4. HOOD DUCT
           1) Open front hood.
           2) Remove attaching tapping screws and screw rivet, then
           remove hood inner.
           3) Remove attaching nuts, then remove hood duct.




B5M0465A




                  33
5-1          SERVICE PROCEDURE
1. Hood


                     B: POINTS TO CHECK
                     1) Check striker for bending or abnormal wear.
                     2) Check safety lever for improper movement.
                     3) Check other levers and spring for rust formation and
                     unsmooth movement.




          G5M0140


                     C: INSTALLATION
                     Installation is in the reverse order of removal.
                     CAUTION:
                     With buffer protruding about 18 mm (0.71 in) beyond
                     radiator panel, make sure that:
                     

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo