Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD97L3794

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3794


>> Download MSA5TCD97L3794 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                                 5-1
                                                         14. Side Protector


           14. Side Protector
           A: REMOVAL
           Side protector consists of three parts; front fender, front
           door and rear door.




B5M0411A

           1. SIDE PROTECTOR FRONT FENDER PORTION
           1) Remove bracket which secures mud guard to front
           fender.
           2) Remove mud guard. 
           NOTE:
           Detach the rear part of mud guard as required for the pro-
           cedure. It is not necessary to remove the entire mud guard.
           3) Use pliers to remove a clip from inside front fender.
           Remove it from vehicle body but keep it with side protec-
B5M0285A   tor.

           2. SIDE PROTECTOR FRONT DOOR AND REAR
           DOOR PORTIONS
           1) Remove trim panel. 
           2) Use pliers to remove clips from inside of doors. Remove
           them from vehicle body but keep them with side protector.
           NOTE:
           Front door portion has five clips, rear door portion has four
           clips.


           B: INSTALLATION
           Installation is in the reverse order of removal.
           NOTE:
           To install side protector front door and rear door portions,
           insert the first clip into the base hole [9 mm (0.35 in) dia.],
           and then insert other clips.
           CAUTION:
           Insert clips firmly and carefully by hand. To avoid dam-
           aging clips, do not forcefully push or hit clips.


                 55



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo