Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD97L3790

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3790 documenatation <<

Text preview - extract from the document

5-1                                     SERVICE PROCEDURE
9. Mud Guard and Rear Arch Protector - 10. Cowl Panel


                                                 2. REAR ARCH PROTECTOR
                                                 Remove rear arch protector.




                                      B5M0289


                                                 3. MUD GUARD (OUTBACK WITH STEP ROOF)
                                                 1) Jack-up vehicle to remove tire.
                                                 2) Remove screws and clips. Move mud guard toward the
                                                 center of the body and remove mud guard.




                                      B5M0410


                                                 B: INSTALLATION
                                                 Installation is in the reverse order of removal.
                                                 CAUTION:
                                                 Only use new screws and clips.




                                                 10. Cowl Panel
                                                 A: REMOVAL
                                                 1) Remove wiper arms.
                                                 2) Open front hood.
                                                 3) Remove cowl panel seal using a plier.



                                     B5M0290A


                                                 4) Lift cowl panel and detach it from clips attached to body
                                                 panel.




                                      B5M0291




                                                        52
   SERVICE PROCEDURE                                                  5-1
                                           10. Cowl Panel - 12. Front Grille


           B: INSTALLATION
           Installation is in the reverse order of removal.
           NOTE:
           When installing cowl panel, first attach a middle clip to the
           cap attached to body panel. Then tap the cowl panel to
           attach it to other clips.




           11. Molding and Retainer
           A: REMOVAL
           1) Remove weatherstrip.
           2) Remove tapping screws.




 B5M0292


           B: INSTALLATION
           Installation is in the reverse order of removal.
           NOTE:
           Insert molding and retainer onto hook, then fasten with
           screws.




B5M0293A


           12. Front Grille
           A: REMOVAL
           1) Remove four upper clips from body panel. To facilitate
           removal, press portion shown in figure using screwdriver.
           2) Pull front grille to detach it from two lower clips.
           (Two lower clips remain on headlight.)


B5M0294A


           B: INSTALLATION
           Attach all clips to grille. Align them with clip hole in body
           and push them into place.




                 53

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo