Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual DIAGNOSTICS SECTION BRAKES [ABS-TCS] MSA5TCD97L3929
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD97L3929 documenatation <<
Text preview - extract from the document
BRAKES 4-4b
5. Control Module I/O Signal
5. Control Module I/O Signal
1. I/O SIGNAL VOLTAGE
Input/Output signals
Contents Connector No. Terminal No.
Measured value and measuring conditions
Front left wheel P7 1--11 0.12 -- 1 V (When it is 10 Hz.)
ABS
sensor Front right wheel P6 8--16 0.12 -- 1 V (When it is 10 Hz.)
(Wheel
speed Rear left wheel P6 7--15 0.12 -- 1 V (When it is 10 Hz.)
sensor)
Rear right wheel P7 2--12 0.12 -- 1 V (When it is 10 Hz.)
Front left outlet P4 1--GND
Front right outlet P5 3--GND 10 -- 14 V when the valve is OFF.
Rear left outlet P5 8--GND Less than 1.5 V when the valve is ON.
Rear right outlet P4 3--GND
Solenoid Front left inlet P4 2--GND
valve Front right inlet P5 2--GND 10 -- 14 V when the valve is OFF.
Rear left inlet P5 7--GND Less than 1.0 V when the valve is ON.
Rear right inlet P4 4--GND
TCS 1 P4 5--GND 10 -- 14 V when the valve is OFF.
Hydraulic TCS 2 P5 6--GND Less than 1.0 V when the valve is ON.
unit
Valve power supply P6 6--GND Ignition switch ON, 10 -- 14 V
Valve relay power supply P6 1--GND Less than 1.2 V when IGN is ON.
10 -- 14 V when the system is down.
Motor relay power supply P6 9--GND Less than 1.0 V when the motor is ON.
10 -- 14 V when the motor is OFF.
P7 3--GND Cyclic waveform of more than 180 Hz
Motor sensor signals when the motor across terminals is ON.
P7 13--GND Less than 70 Hz when the motor is OFF.
H/L toggle signal with the brake pedal off
(Cycle 14 mS, H: 10 --14 V, L: less than
Pressure switch P7 6--GND 0.7 V). 10 -- 14 V with the brake pedal
depressed.
Pedal Output signals P7 5--GND 0.7 -- 0.9 V with the brake pedal off.
stroke
sensor Power supply P7 4--14 5◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo