Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual DIAGNOSTICS SECTION BRAKES [ABS-TCS] MSA5TCD97L3933
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD97L3933 documenatation <<
Text preview - extract from the document
BRAKES 4-4b
9. Select Monitor Function Mode
9. Select Monitor Function Mode
Applicable cartridge of select monitor: No. 498349601
G2M0096
A: LIST OF FUNCTION MODE
1. F MODE (ROM ID, ANALOG DATA ARE
DISPLAYED.)
Function code Measuring
Contents to be monitored Scroll Ref. to 4-4b
Code Abbreviation items
ECM identifi- ROM ID number of ECM is read and enabled com-
F00 ROM Possible [T9B0]
cation munication state is displayed.
FR wheel Wheel speed detected by the FR wheel speed sen-
F01 FR Possible [T9C0]
speed (mile/h) sor is displayed in mile/h.
FL wheel Wheel speed detected by the FL wheel speed sen-
F02 FL Possible [T9D0]
speed (mile/h) sor is displayed in mile/h.
RR wheel Wheel speed detected by the RR wheel speed sen-
F03 RR Possible [T9E0]
speed (mile/h) sor is displayed in mile/h.
RL wheel Wheel speed detected by the RL wheel speed sen-
F04 RL Possible [T9F0]
speed (mile/h) sor is displayed in mile/h.
FR wheel Wheel speed detected by the FR wheel speed sen-
F05 FR Possible [T9C0]
speed (km/h) sor is displayed in km/h.
FL wheel Wheel speed detected by the FL wheel speed sen-
F06 FL Possible [T9D0]
speed (km/h) sor is displayed in km/h.
RR wheel Wheel speed detected by the RR wheel speed sen-
F07 RR Possible [T9E0]
speed (km/h) sor is displayed in km/h.
RL wheel Wheel speed detected by the RL wheel speed sen-
F08 RL Possible [T9F0]
speed (km/h) sor is displayed in km/h.
Pedal stroke The number of output steps of the pedal stroke [T9G0]
F09 PSS Possible
sensor output sensor is displayed.
85
4-4b BRAKES
9. Select Monitor Function Mode
2. FA MODE (ON/OFF DATA ARE DISPLAYED.)
If the system is in normal condition with the engine run at
idle speed (when the brake pedal is off), the LED of EC
(AEC signal) of FA2 will come on, the LED of EM (EAM
signal) blink and all other LED's go out.
Function code Measuring
Contents to be monitored Scroll Ref. to 4-4b
Code Abbreviation items
OF OFF.SW LED 1 comes on with the OFF switch on.
Stop light LED 2 comes on with the switch on (with the brake
B1
switch pedal down).
Valve relay
VR LED 3 comes on with the valve relay off.
signal
Valve relay
FA0 VM LED 4 comes on with the valve relay off. Possible [T9H0]
monitor
Motor relay
MR LED 5 comes on with the motor on.
signal
MS Motor sensor LED 6 comes on with the motor on.
Fluid level LED 7 comes on with the sensor on (the fluid level
FS
sensor is lowered).
LED 1 comes on when the FR.IN valve is operat-
FI FR.IN valve
ing.
LED 2 comes on when the FR.OUT valve is operat-
RO FR.OUT valve
ing.
FL FL.IN valve LED 3 comes on when the FL.IN valve is operating.
LED 4 comes on when the FL.OUT valve is operat-
LO FL.OUT valve
ing.
T1 TCS1 valve LED 5 comes on when the TCS1 valve is operating.
FA1 LED 6 comes on when the RR.IN valve is operat- Possible [T9I0]
RI RR.IN valve
ing.
LED 7 comes on when the RR.OUT valve is operat-
RO RR.OUT valve
ing.
RI RL.IN valve LED 8 comes on when the RL.IN valve is operating.
LED 9 comes on when the RL.OUT valve is operat-
LO RL.OUT valve
ing.
LED 10 comes on when the TCS2 valve is operat-
T2 TCS2 valve
ing.
ABS warning
AW LED 1 comes on when the warning light is on.
light
TCS warning
TW LED 2 comes on when the warning light is on.
light
TCS OFF
TO LED 3 comes on when the indicator light is on.
indicator light
TCS operation
TI LED 4 comes on when the indicator light is on.
FA2 indicator light Possible [T9J0]
EC AEC signal With the engine run at idle speed, LED 6 (AEC)
comes on and LED 7 (AEB) goes out (They go on
EB AEB signal and off depending on the behavior of a vehicle.)
ET AET signal LED 8 comes on with the TCS control on.
LED 9 comes on or blinks when the engine control
EM EAM signal
is enabled.
AT AAT signal LED 10 comes on when ABS control is on.
86
BRAKES 4-4b
9. Select Monitor Function Mode
3. FB MODE (TROUBLE CODES ARE DISPLAYED.)
Function code Measuring
Contents to be monitored Scroll Ref. to 4-4b
Code Abbreviation items
The most
Trouble codes, trouble spots and symptoms for the
FB0 DNEW recent failures Possible [T10B0]
most recent failure are displayed.
are displayed.
Historical
Trouble codes, trouble spots and symptoms for all [T10B0]
FB1 DALL troubles are Possible
historical failures are displayed.
displayed.
4. FC MODE (TROUBLE CODES ARE ERASED.)
Function code Measuring
Contents to be monitored Scroll Ref. to 4-4b
Code Abbreviation items
Trouble codes [T9K0]
FC0 DCLR Function of clearing trouble code stored in memory. Possible
are erased.
5. FD MODE (SEQUENCE CHECK AND AIR RELEASE
MODE)
Function code Measuring
Contents to be monitored Scroll Ref. to
Code Abbreviation items
ABS
Perform ABS sequence control by operating valve 4-4
FD1 ACHK sequence Impossible
and pump motor sequentially. [W20D0]
control
TCS
Perform TCS sequence control by operating the 4-4
FD2 TCHK sequence Impossible
valve and pump motor sequentially. [W20F0]
control
4-4
Air bleeding Manually operate the valve and pump motor to
FD3 AIR Impossible [W19A0]
control bleed air.
87
4-4b BRAKES
9. Select Monitor Function Mode
B: MODE F00
-- ROM ID NUMBER (ROM) --
CONDITION:
Ignition switch ON
SPECIFIED DATA:
Presentation display
B4M0479
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo