Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ENGINE SECTION ENGINE (DOHC) MSA5TCD97L3473

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3473 documenatation <<

Text preview - extract from the document

2-3b               SERVICE PROCEDURE
4. Cylinder Head


                       4. Cylinder Head
                       A: REMOVAL
                       1. INTAKE MANIFOLD
                       1) Remove V-belt.
                       2) Remove generator, air conditioner compressor and
                       brackets.
                       3) Remove hoses and tubes from cylinder block.
                       4) Disconnect each connector and/or remove connector
                       bracket.
                       5) Remove coolant filler tank.
                       6) Remove intake manifold assembly and gasket.
                       7) Remove water pipe.
                       8) Remove crank angle sensor, cam angle sensor and
                       knock sensor.
                       9) Remove timing belt, camshaft sprockets and related
                       parts.
                       
                       10) Remove rocker cover, camshafts and related parts.
                       

                       2. CYLINDER HEAD




                                                                     B2M0770A




                            36
  SERVICE PROCEDURE                                          2-3b
                                                    4. Cylinder Head


          1) Remove oil level gauge guide attaching bolt (left-hand
          only).
          2) Remove cylinder head bolts in numerical sequence
          shown in figure.
          CAUTION:
          Leave bolts k and k engaged by three or four threads
                         1      4
          to prevent cylinder head from falling.
          3) While tapping cylinder head with a plastic hammer,
          separate it from cylinder block.
G2M0757
          Remove bolts k and k to remove cylinder head.
                           1      4
          4) Remove cylinder head gasket.
          5) Similarly, remove right-hand cylinder head.

          B: DISASSEMBLY




                                                           B2M1220A




               37
2-3b                  SERVICE PROCEDURE
4. Cylinder Head


                              1) Remove shims and valve lifters.
                              2) Compress the valve spring and remove the valve spring
                              retainer key. Remove each valve and valve spring.
                              ST1 498267600 CYLINDER HEAD TABLE
                              ST2 499718000 VALVE SPRING REMOVER
                              CAUTION:
                              

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo