Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ENGINE SECTION ENGINE COOLING SYSTEM MSA5TCD97L3494

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3494 documenatation <<

Text preview - extract from the document

2-5                                      SERVICE PROCEDURE
5. Radiator Cap - 6. Radiator Fan and Fan Motor


                                                  5. Radiator Cap
                                                  A: INSPECTION
                                                  1) Attach radiator cap to tester.
                                                  2) Increase pressure until tester gauge pointer stops.
                                                  Radiator cap is functioning properly if it holds the service
                                                  limit pressure for five to six seconds.
                                                  Standard pressure:
                                                      78 -- 98 kPa (0.8 -- 1.0 kg/cm2, 11 -- 14 psi)
                                      G2M0223     Service limit pressure:
                                                      69 kPa (0.7 kg/cm2, 10 psi)
                                                  CAUTION:
                                                  Be sure to remove foreign matter and rust from the cap
                                                  in advance; otherwise, results of pressure test will be
                                                  incorrect.




                                                  6. Radiator Fan and Fan Motor
                                                  A: REMOVAL
                                                  1) Disconnect ground cable from battery terminal.
                                                  2) Disconnect connector of fan motor.




                                      G2M0263


                                                  3) Remove reservoir tank.




                                      G2M0224


                                                  4) Remove four bolts holding shroud to radiator.




                                       B2M0308




                                                        16
   SERVICE PROCEDURE                                                   2-5
                      6. Radiator Fan and Fan Motor - 7. Engine Coolant Pipe


           5) Remove radiator fan motor assembly.
           6) Remove fan motor from shroud.




 B2M0323


           B: INSTALLATION
           Installation is in the reverse order of removal procedures.
           Do the following:
           1) Before installing radiator fan motor, apply a coat of seal-
           ant to threads and tighten nuts.
           2) Make sure radiator fan does not come into contact with
           shroud when installed.
           3) After installation, make sure there is no unusual noise
           or vibration when fan is rotated.


           7. Engine Coolant Pipe
           A: REMOVAL
           1) Release fuel pressure.
           
           2) Disconnect ground cable from the battery.



G6M0095


           3) Drain engine coolant completely.
           




B2M0015A


           4) Remove intake manifold.
           




 B2M0160




                 17

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo