Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ENGINE SECTION ENGINE COOLING SYSTEM MSA5TCD97L3495

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3495


>> Download MSA5TCD97L3495 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                                   2-5
                      6. Radiator Fan and Fan Motor - 7. Engine Coolant Pipe


           5) Remove radiator fan motor assembly.
           6) Remove fan motor from shroud.




 B2M0323


           B: INSTALLATION
           Installation is in the reverse order of removal procedures.
           Do the following:
           1) Before installing radiator fan motor, apply a coat of seal-
           ant to threads and tighten nuts.
           2) Make sure radiator fan does not come into contact with
           shroud when installed.
           3) After installation, make sure there is no unusual noise
           or vibration when fan is rotated.


           7. Engine Coolant Pipe
           A: REMOVAL
           1) Release fuel pressure.
           
           2) Disconnect ground cable from the battery.



G6M0095


           3) Drain engine coolant completely.
           




B2M0015A


           4) Remove intake manifold.
           




 B2M0160




                 17
2-5                        SERVICE PROCEDURE
7. Engine Coolant Pipe


                                   5) Disconnect heater inlet hose.




                         B2M0138


                                   6) Disconnect radiator inlet hose from engine coolant pipe.




                         B2M0139


                                   7) Remove bolts which install engine coolant pipe on cyl-
                                   inder block.




                         B2M0141


                                   B: INSTALLATION
                                   1) Install engine coolant pipe on cylinder block.
                                   Tightening torque:
                                      6.4



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo