Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD97L3512

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD97L3512


>> Download MSA5TCD97L3512 documenatation <<

Text preview - extract from the document
2-7                                       SERVICE PROCEDURE
9. Throttle Position Sensor - 11. Pressure Sensor (AT model)


                                                   4) When using Subaru Select Monitor;
                                                      (1) Connect Subaru Select Monitor to the data link con-
                                                      nector.
                                                      (2) Turn ignition switch to ON and SSM switch to ON.
                                                      (3) Select mode "F10".
                                                      (4) Adjust throttle position sensor to specified data.
                                                   Condition                   / Specified data.
                                                      Throttle fully closed / 0.50 V
                                                      (5) Tighten throttle position sensor holding screws.
                                        G2M0096


                                                   10. Camshaft Position Sensor
                                                   A: REMOVAL AND INSTALLATION
                                                   1) Disconnect connector from camshaft position sensor.




                                        G2M0416


                                                   2) Remove camshaft position sensor from camshaft sup-
                                                   port LH.
                                                   3) Installation is in the reverse order of removal.
                                                   Tightening torque:
                                                      6.4



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo