Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD97L3879

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3879


>> Download MSA5TCD97L3879 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                                  6-2
                                 9. Spot Light - 10. Front Wiper and Washer


           9. Spot Light
           A: REMOVAL AND INSTALLATION
           1. SPOT LIGHT AND SWITCH
           1) Pry spot light lens off using a screwdriver.
           2) Remove screws which secure spot light body.
           3) Remove spot light body while disconnecting connec-
           tor(s).

 B6M0346


           B: INSPECTION
           1. SPOT LIGHT SWITCH
           Move switch and check continuity between terminal of spot
           light switch connector and steel plate as shown.
           Switch position       Connector terminal          Plate
                 Open (OFF)
                Push in (ON)             k                    k

 B6M0347


           10. Front Wiper and Washer
           A: ON-CAR SERVICES
           1. ADJUSTMENT
           1) Turn the wiper switch to OFF position.
           2) Adjust blades in original position as shown in figure by
           changing wiper arm installation.


B6M0907A


           3) Stop the vehicle.
           4) Adjust washer ejecting point on windshield glass as
           shown in figure.
           Ejecting point:
              A: 375 mm (14.76 in)
              B: 150 mm (5.91 in)
              C: 380 mm (14.96 in)


 G6M0116


           B: REMOVAL AND INSTALLATION
           1. BLADE
           Pull out blade following the arrow direction from arm while
           pushing up locking clip.




B6M0107A




                  23



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo