Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD97L3889

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3889


>> Download MSA5TCD97L3889 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                             6-2
                                                           19. Sunroof


           19. Sunroof
           A: REMOVAL AND INSTALLATION
           1. SUNROOF AND SUNROOF MOTOR
           Refer to 5-1 [W16A0] as for removal and installation of
           sunroof system.




           2. SUNROOF SWITCH
           NOTE:
           The sunroof switch is installed in spot light body.
           1) Pry spot light lens off using a screwdriver.
           2) Remove screws which secure spot light body.
           3) Remove spot light body while disconnecting connec-
           tors.
           4) Remove screw which secures sunroof switch, and then
           remove sunroof switch.
B6M0353A


           B: INSPECTION
           1. SUNROOF SWITCH
           Set sunroof switch to each position and check continuity
           between terminals as indicated in table below:
                            Terminal
                                       4   3    6      5        2
           Switch position
                    Open               k   k
                    Close              k        k
                    Tilt up            k               k
B6M0142A
                  Tilt down            k                        k




           2. SUNROOF MOTOR
           1) Apply battery voltage between 1-pin connector and
           body ground wire.
           2) Make sure that sunroof motor moves when connecting
           terminals as described below:



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo