Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual ELECTRICAL SECTION ENGINE ELECTRICAL SYSTEM MSA5TCD97L3862

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3862


>> Download MSA5TCD97L3862 documenatation <<

Text preview - extract from the document
6-1                            SERVICE PROCEDURE
1. Starter - 2. Generator


                                       5) Installing end frame
                                       When assembling end frame to yoke, align notched portion
                                       of end frame with lead wire grommet.




                            B6M0472A


                                       6) Installing yoke
                                       When installing yoke to magnetic switch, align notch of
                                       yoke with protrusion of magnetic switch.




                            B6M0473A


                                       2. Generator
                                       A: REMOVAL AND INSTALLATION
                                       1) Disconnect battery ground cable.




                            G6M0095


                                       2) Disconnect connector and terminal from generator.




                            G2M0088


                                       3) Remove V-belt cover.
                                       4) Remove front side V-belt.




                            G2M0286




                                            16
   SERVICE PROCEDURE                                             6-1
                                                          2. Generator


           5) Remove bolts which install generator onto bracket.




G2M0090


           6) Installation is in the reverse order of removal.
           CAUTION:
           Check and adjust V-belt tension. 




G2M0090


           B: DISASSEMBLY
           1) Heat the portion k of rear cover to 50



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo