Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD97L3749

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3749 documenatation <<

Text preview - extract from the document

4-7                 SERVICE PROCEDURE
11. Compressor


                            11. Compressor
                            Compressor is a swash plate type. When trouble occurs,
                            replace compressor as a single unit.




                            A: COMPRESSOR CLUTCH INSPECTION
                            Compressor clutch trouble is often caused by clutch slip-
                            page and noise. Check and take corrective measures, as
                            required.
                            1) Remove belt cover.
                            2) Check that clearance between drive plate and pulley
                            over the entire perimeter is within specifications.
                            Clearance:
                  B4M0090
                               0.3 -- 0.6 mm (0.012 -- 0.024 in)

                            3) Check that voltage applied to magnetic coil is at least
                            10.5 volts.
                            4) When noise is noted, check that it originates in either
                            compressor or pulley bearing.




                  B4M0091


                            B: REMOVAL
                            1) Disconnect ground cable from battery.
                            2) Discharge refrigerant using refrigerant recovery system.
                            
                               (1) Fully close low-pressure valve of manifold gauge.
                               (2) Connect low-pressure charging hose of manifold
                               gauge to low-pressure service valve.
                               (3) Open low-pressure manifold gauge valve slightly,
                               and slowly discharge refrigerant from system.
                 B4M0760A
                            CAUTION:
                            Do not allow refrigerant to rush out. Otherwise, com-
                            pressor oil will be discharged along with refrigerant.




                                  30
   SERVICE PROCEDURE                                             4-7
                                                        11. Compressor


           3) Remove low-pressure hose k (Flexible hose Ps) and
                                          1
           high-pressure hose k (Flexible hose Pd).
                              2
           CAUTION:
           

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo