Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD97L3700

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD97L3700


>> Download MSA5TCD97L3700 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                               4-4
                                                  13. Proportioning Valve


           13. Proportioning Valve




B4M1177A




B4M1197A


           A: INSPECTION
           1) Install the oil pressure gauges to measure the master
           cylinder fluid pressure (front wheel brake fluid pressure)
           and rear wheel cylinder fluid pressure.
           2) Bleed air from the oil pressure gauges.
           3) Check the master cylinder fluid pressure and rear wheel
           cylinder fluid pressure.
           The standard values are shown in Figure.
           4) For the oil pressure in case of split point, refer to A:
B4M1198A
           SPECIFICATIONS 4-4 [S1A0].

           B: REMOVAL
           1) Remove brake pipe from proportioning valve at four
           places.
           2) Remove proportioning valve from its bracket.
           CAUTION:
           Do not disassemble or adjust the proportioning valve.
           (The proportioning valve must be replaced as an
           assembly.)

           C: INSTALLATION
           1) Install proportioning valve to bracket.
           2) Connect brake pipes correctly to proportioning valve.
           3) Bleed air, then check each joint of brake pipe for oil
           leaks.
           Tightening torque:
              Proportioning valve to brake pipe flare nut:
                     +3          +0.3           +2.2
                  15-2 Nm (1.5-0.2 kg-m, 10.8-1.4 ft-lb)
              Proportioning valve to bracket:
                  18



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo