Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual MECHANICAL COMPONENTS SECTION HEATER AND VENTILATOR MSA5TCD97L3732

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3732 documenatation <<

Text preview - extract from the document

   SERVICE PROCEDURE                                                4-6
                                                     5. Intake Door Motor


           5. Intake Door Motor
           A: REMOVAL
           1) Disconnect GND cable from battery.
           2) Remove glove box and pocket back panel. 
           3) Remove heater duct or evaporator. (With A/C model).
           

 B5M0025


           4) Remove intake unit from the vehicle.




G4M0561


           5) Remove screws which secure intake door motor to
           intake unit.
           NOTE:
           Ensure that RECIRC switch is set to "ON".




B4M1428A




B4M1429A




                 11
4-6                       SERVICE PROCEDURE
5. Intake Door Motor


                                  B: INSPECTION
                                  1) When approx. 12 V is applied to the intake door motor
                                  terminals, intake door motor operates as follows:
                                     Intake       Terminal
                                   door motor                      Intake door motor operation
                                    position
                                                        2*
                                    FRESH                     Door motor moved to FRESH position.
                                                  3*    1**
                       B4M0294A
                                                  2**   1*
                                    RECIRC                    Door motor moved to RECIRC position.
                                                        3**
                                  *: LHD model
                                  **: RHD model




                                  2) Connect harness to intake door motor.
                                  3) Turn ignition switch to "ACC" and RECIRC switch to
                                  "ON" then, set to "RECIRC".
                                  NOTE:
                                  Ensure that intake door motor is set in the "RECIRC" mode.
                                  4) Install intake door motor on intake unit.
                                  5) Secure rod holder to link, and install link to intake unit.
                                  6) Manually set rod in the "RECIRC" mode, and secure to
                                  rod holder.
                       B4M1430A
                                  7) Operate mode selector switch to ensure that system
                                  changes from intake air to "RECIRC" and from "RECIRC"
                                  to intake air in full-stroke range.




                       B4M1431A


                                  C: INSTALLATION
                                  Installation is in the reverse order of removal.




                                         12

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo