Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual MECHANICAL COMPONENTS SECTION SUSPENSION MSA5TCD97L3636

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3636 documenatation <<

Text preview - extract from the document

4-1                      SERVICE PROCEDURE
6. Front Crossmember


                                 6. Front Crossmember
                                 A: REMOVAL
                                 1)   Disconnect ground cable from battery.
                                 2)   Loosen front wheel nuts.
                                 3)   Lift-up vehicle, and remove front tires and wheels.
                                 4)   Remove both stabilizer and jack-up plate.
                                 5)   Disconnect tie-rod end from housing.
                                 6)   Remove front exhaust pipe.
                       G4M0520


                                 7) Remove front transverse link from front crossmember
                                 and body.
                                 8) Remove nuts attaching engine mount cushion rubber to
                                 crossmember.
                                 9) Remove self-locking nuts connecting steering U/J and
                                 pinion shaft.
                                 10) Lift engine by approx. 10 mm (0.39 in) by using chain
                                 block.
                                 11) Support crossmember with a jack, remove nuts secur-
                       G4M0521
                                 ing crossmember to body and lower crossmember gradu-
                                 ally along with steering gearbox.
                                 CAUTION:
                                 When removing crossmember downward, be careful
                                 that tie-rod end does not interfere with DOJ boot.

                                 B: INSTALLATION
                                 1) Installation is in the reverse order of removal proce-
                                 dures.
                                 CAUTION:
                                 Always tighten rubber bushing when wheels are in full
                                 contact with the ground and vehicle is at curb weight
                                 condition.
                                 Tightening torque:
                                    Transverse link bushing to crossmember:
                                        98

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo