Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD97L3604
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD97L3604 documenatation <<
Text preview - extract from the document
3-2 SERVICE PROCEDURE
10. High Clutch
10. High Clutch
G3M0469
k
1 High clutch drum k
8 Drive plate
k
2 Lathe cut seal ring k
9 Driven plate (Thicker)
k
3 High clutch piston k
10 Retaining plate
k
4 Lathe cut seal ring k
11 Snap ring
k
5 Spring retainer k
12 Thrust needle bearing
k
6 Snap ring k
13 High clutch hub
k
7 Driven plate (Thinner)
A: DISASSEMBLY
1) Remove the snap ring k, and take out the retaining
11
k, drive plates k , and driven plates k , k .
plate 10 8 7 9
2) Using the ST1, ST2 and ST3, remove the snap ring k6
and take out the spring retainer k .
5
ST1 398673600 COMPRESSOR
ST2 398177700 INSTALLER
ST3 399893600 PLIERS
3) Apply compressed air to the clutch drum k to remove
1
the piston k .
3
B: INSPECTION
1) Drive plate facing for wear and damage
2) Snap ring for wear, return spring for setting and
breakage, and spring retainer for deformation
3) Lathe cut seal rings (large) (small) for damage
4) Piston check ball for smooth operation
98
SERVICE PROCEDURE 3-2
10. High Clutch
C: ASSEMBLY
G3M0469
k
1 High clutch drum k
8 Drive plate
k
2 Lathe cut seal ring k
9 Driven plate (Thicker)
k
3 High clutch piston k
10 Retaining plate
k
4 Lathe cut seal ring k
11 Snap ring
k
5 Spring retainer k
12 Thrust needle bearing
k
6 Snap ring k
13 High clutch hub
k
7 Driven plate (Thinner)
1) Using the ST1, ST2 and ST3 as those used in
disassembling, assemble the piston k , spring retainer k ,
3 5
and snap ring k .6
ST1 398673600 COMPRESSOR
ST2 398177700 INSTALLER
ST3 399893600 PLIERS
2) Install the driven plate (thinner) k , drive plates k ,
7 8
driven plates (thicker)k , and retaining plate k in that order.
9 10
Then attach the snap ring k. 11
3) Checking operation:
Apply compressed air intermittently to the oil hole, and
check the high clutch for smooth operation.
4) Measuring clearance (Retaining plate selection):
Standard value:
1.8 -- 2.2 mm (0.071 -- 0.087 in)
Allowable limit:
2.6 mm (0.102 in)
NOTE:
Before measuring clearance, place the same thickness of
shim on both sides to prevent retaining plate from tilting.
99
3-2 SERVICE PROCEDURE
10. High Clutch - 11. Forward Clutch Drum
Part No. Thickness mm (in)
31567AA190 3.6 (0.142)
31567AA200 3.8 (0.150)
31567AA210 4.0 (0.157)
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo