Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1997 1997 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION TRANSMISSION CONTROL SYSTEM MSA5TCD97L3616

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD97L3616 documenatation <<

Text preview - extract from the document

   SERVICE PROCEDURE                                                   3-3
                          1. Manual Transmission - 2. Automatic Transmission


           2. Automatic Transmission
           A: REMOVAL
           1) Remove the cable.
              (1) Prior to removal, set lever to "N" position.
              (2) Remove front exhaust pipe.



G3M0698


              (3) Separate cable from transmission lever.
              (4) Remove clamp from transmission case.




G3M0699


              (5) Disconnect cable from selector lever and then
              remove cable bracket.




B3M0102A


           2) Remove console box. 
           3) Disconnect the connectors.




G3M0702


           4) Remove the screws to take off the plate from the body.




G3M0703




                 11
3-3                            SERVICE PROCEDURE
2. Automatic Transmission


                                       B: DISASSEMBLY
                                       1) Remove grip from selector lever.
                                       2) Remove indicator from plate.




                            G3M0704


                                       3) Remove the following parts from the grip.
                                       k Button
                                        1
                                       k Spring
                                        2




                            B3M0346A


                                       4) Remove shift-lock solenoid and "P" position switch.




                            G3M0706


                                       5) Remove the bolt to take off the selector lever from the
                                       plate and remove selector lever from the plate.




                            G3M0707


                                       6) Remove lock plate.
                                       7) Remove selector lever from the plate.




                            G3M0708




                                             12
  SERVICE PROCEDURE                                                   3-3
                                                  2. Automatic Transmission


          8) Remove detention spring.




G3M0709


          C: INSPECTION
          1) Inspect removed parts by comparing with new ones for
          deformation, damage and wear. Correct or replace if defec-
          tive.
          2) Confirm the following parts for operating condition
          before assembly.
              (1) Sliding condition of the button in the grip ... it should
              move smoothly.
              (2) Insertion of the grip on the selector lever ... when
              pushing the grip on the selector lever by hand, screw
              holes should be aligned.
              (3) Operation of selector lever and rod ... they should
              move smoothly.
              (4) Insertion of the spacer into the selector lever ... it
              should be inserted lightly by finger pressure.




          D: ASSEMBLY
          1) Clean all parts before assembly.
          Apply grease [NIGLUBE-R or equivalent].
          
          2) Assemble selector lever to the plate.
          3) Insert the bolt and tighten the flange nut to the specified
          torque.
          Tightening torque (Flange nut):
              12

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo