Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD98L21201

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21201 documenatation <<

Text preview - extract from the document

5-1   [W3A1]                          SERVICE PROCEDURE
3. Fuel Flap


3. Fuel Flap                                                4. Front Bumper
A: REMOVAL AND INSTALLATION                                 A: REMOVAL AND INSTALLATION
1. FUEL FLAP                                                1. EXCEPT OUTBACK MODEL
1) Remove bolts which hold hinge to fuel flap, and          1) Disconnect the ground cable from the battery.
detach fuel flap.                                           2) Remove two bolts from lower center of bumper.




                                         B5M0373                                                    B5M0273

2) Installation is in the reverse order of removal.         3) Remove mud guard. 
CAUTION:                                                    NOTE:
Make sure the clearance between fuel flap and
                                                            It is not necessary to remove the entire mud guard.
vehicle body is equal at all points.
                                                            Remove clips from the front section of mud guard,
2. FUEL FLAP OPENER                                         if necessary.
1) Remove rear seats, center pillar lower cover,            4) Remove the canister. 
floor mat, rear arch cover/rear quarter trim                5) Remove two bolts from side of bumper.
(Wagon), and side sill cover (on the driver's side).
2) Remove all clips which hold cable.
3) Disconnect cable from pull handle.




                                                                                                    B5M0274

                                                            6) Remove front grill. 
                                        B5M0374A            7) Remove headlight. 
                                                            8) Remove clips from both sides of front bumper.
4) Detach pull handle by removing bolts.
5) Detach fuel lock holder by turning it.                   NOTE:
6) Installation is in the reverse order of removal.         When removing, push the pin at the center of clip
                                                            with a thin screwdriver.
CAUTION:

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo