Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD98L21207

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD98L21207


>> Download MSA5TCD98L21207 documenatation <<

Text preview - extract from the document
                                        SERVICE PROCEDURE                                         [W9A2] 5-1
                                                                            9. Mud Guard and Rear Arch Protector


6) Installation is in the reverse order of removal.           9. Mud Guard and Rear Arch
NOTE:                                                         Protector
Check for alignment of front fender with hood and
front door with front fender at all points. Adjust, if        A: REMOVAL AND INSTALLATION
necessary.
                                                              1. MUD GUARD (EXCEPT OUTBACK
                                                              MODEL)
                                                              1) Jack-up vehicle to remove tire.
                                                              2) Remove screws and clips. Move mud guard
                                                              toward the center of the body and remove mud
                                                              guard.




                                          G5M0175




                                                                                                       B5M0288

                                                              3) Installation is in the reverse order of removal.
                                                              CAUTION:
                                                              Only use new screws and clips.
                                          B5M0287A            2. MUD GUARD (OUTBACK MODEL)
                                                              1) Jack-up vehicle to remove tire.
                                                              2) Remove screws and clips. Move mud guard
                                                              toward the center of the body and remove mud
                                                              guard.




                                                                                                       B5M0410

                                                              3) Installation is in the reverse order of removal.
                                                              CAUTION:
                                                              Only use new screws and clips.




                                                         49
5-1   [W9A3]                          SERVICE PROCEDURE
10. Cowl Panel


3. REAR ARCH PROTECTOR                                     10. Cowl Panel
1) Remove rear arch protector.
                                                           A: REMOVAL AND INSTALLATION
                                                           1) Remove wiper arms.
                                                           2) Open front hood.
                                                           3) Remove cowl panel seal using a plier.




                                         B5M0289

2) Installation is in the reverse order of removal.
CAUTION:
Only use new screws and clips.                                                                     B5M0290A

                                                           4) Lift cowl panel and detach it from clips attached
                                                           to body panel.




                                                                                                    B5M0291

                                                           5) Installation is in the reverse order of removal.
                                                           NOTE:
                                                           When installing cowl panel, first attach a middle
                                                           clip to the cap attached to body panel. Then tap the
                                                           cowl panel to attach it to other clips.




                                                      50



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo