Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD98L21212

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21212 documenatation <<

Text preview - extract from the document

                                       SERVICE PROCEDURE                                           [W14A2] 5-1
                                                                                                14. Side Protector


14. Side Protector                                           CAUTION:
                                                             Insert clips firmly and carefully by hand. To
A: REMOVAL AND INSTALLATION                                  avoid damaging clips, do not forcefully push or
                                                             hit clips.
Side protector consists of three parts; front fender,
front door and rear door.                                    2. SIDE PROTECTOR FRONT DOOR AND
                                                             REAR DOOR PORTIONS
                                                             1) Remove trim panel. 
                                                             2) Use pliers to remove clips from inside of doors.
                                                             Remove them from vehicle body but keep them
                                                             with side protector.
                                                             NOTE:
                                                             Front door portion has five clips, rear door portion
                                                             has four clips.
                                                             3) Installation is in the reverse order of removal.
                                                             CAUTION:
                                                             Insert clips firmly and carefully by hand. To
                                                             avoid damaging clips, do not forcefully push or
                                                             hit clips.
                                                             NOTE:
                                                             To install side protector front door and rear door
                                                             portions, insert the first clip into the base hole [9
                                                             mm (0.35 in) dia.], and then insert other clips.



                                         B5M0411A



1. SIDE PROTECTOR FRONT FENDER
PORTION
1) Remove bracket which secures mud guard to
front fender.




                                         B5M0285A

2) Remove mud guard.  and

NOTE:
Detach the rear part of mud guard as required for
the procedure. It is not necessary to remove the
entire mud guard.
3) Use pliers to remove a clip from inside front
fender. Remove it from vehicle body but keep it
with side protector.
4) Installation is in the reverse order of removal.

                                                        53

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo