Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual DIAGNOSTICS SECTION BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS) MSA5TCD98L21363

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD98L21363 documenatation <<

Text preview - extract from the document

6-2b [T1A1] BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS)
1. Starter Interlock System (MT Model)

1. Starter Interlock System (MT 1A3 : CHECK POWER SUPPLY FOR
Model) STARTER INTERLOCK RELAY.

A: DIAGNOSTICS PROCEDURE 1) Disconnect all connectors from starter motor.
2) Disconnect connector of starter interlock relay.
1A1 : CHECK MAIN POWER SUPPLY FOR 3) Turn ignition switch to ST (START).
STARTER MOTOR. 4) Measure voltage between starter interlock relay
connector and chassis ground.
Measure voltage between starter motor terminal B Connector & terminal
and chassis ground. (B105) No. 2 (+) -- Chassis ground (-):
Connector & terminal
Terminal B (+) -- Chassis ground (-):

B6M0385A

B6M0383A : Is the voltage more than 10 V?
: Go to step 1A4.
: Is the voltage more than 10 V?
: Repair wiring harness.
: Go to step 1A2.
: Repair wiring harness. 1A4 : CHECK POWER SUPPLY FOR
STARTER INTERLOCK RELAY.
1A2 : CHECK POWER SUPPLY FOR MAG-
NET COIL OF STARTER MOTOR. Measure voltage between starter interlock relay
connector and chassis ground.
1) Disconnect all connectors from starter motor. Connector & terminal
2) Turn ignition switch to ST (START).
(B105) No. 4 (+) -- Chassis ground (-):
3) Depress clutch pedal.
4) Measure voltage between starter motor termi-
nal S connector and chassis ground.
Connector & terminal
(B14) (+) -- Chassis ground (-):

B6M0385A

: Is the voltage more than 10 V?
: Go to step 1A5.
B6M0384A : Repair wiring harness. Go to step 1A5.

: Is the voltage more than 10 V?
: Go to step 1A3.
: Repair or replace starter motor.

2
BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS) [T1A8] 6-2b
1. Starter Interlock System (MT Model)

1A5 : CHECK STARTER INTERLOCK 2) Check continuity between terminals when
RELAY. clutch pedal is released.
Terminals
1) Disconnect connector of starter interlock relay. No. 1 -- No. 2:
2) Connect battery to terminal No. 2 and ground
terminal No. 1.
3) Check continuity between terminals.
When current flows. Between termi- Continuity
nals No. 3 and exists.
No. 4
When current does not Between termi- Continuity does
flow. nals No. 3 and not exist.
No. 4
Between termi- Continuity
G6M0184
nals No. 1 and exists.
No. 2
: Is the resistance less than 10 ?
(With pedal released)
: Go to step 1A7.
: Adjust or replace clutch switch.

1A7 : CHECK CLUTCH SWITCH.

Check continuity between terminals when clutch
pedal is depressed.
Terminals
No. 1 -- No. 2:

B6M0386A
G6M0184
: Is starter interlock relay normal?
: Go to step 1A6. : Is the resistance more than 1 M?
(With pedal depressed)
: Replace starter interlock relay.
: Go to step 1A8.
1A6 : CHECK CLUTCH SWITCH. : Adjust or replace clutch switch.

1) Disconnect connector of clutch switch. 1A8 : CHECK HARNESS CONNECTOR
BETWEEN STARTER INTERLOCK
RELAY AND STARTER MOTOR.

1) Disconnect connectors of starter interlock relay
and starter motor.

3
6-2b [T1A9] BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS)
1. Starter Interlock System (MT Model)

2) Measure resistance of harness connector : Is the resistance less than 10 ?
between starter interlock relay and starter motor. : Go to step 1A10.
Connector & terminal : Repair wiring harness.
(B105) No. 3 -- (B14):
1A10 : CHECK GROUND CIRCUIT OF
CLUTCH SWITCH.

1) Disconnect connector of clutch switch.
2) Measure resistance of harness connector
between clutch switch and chassis ground.
Connector & terminal
(B106) No. 1 (+) -- Chassis ground (-):
B6M0387A

: Is the resistance less than 10 ?
: Go to step 1A9.
: Repair wiring harness.

1A9 : CHECK HARNESS CONNECTOR
BETWEEN STARTER INTERLOCK
RELAY AND CLUTCH SWITCH.
B6M0389A

1) Disconnect connectors of starter interlock relay
: Is the resistance less than 10 ?
and clutch switch.
2) Measure resistance of harness connector : System is normal.
between starter interlock relay and clutch switch. : Repair wiring harness.
Connector & terminal
(B105) No. 1 -- (B106) No. 2:

B6M0388A

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo