Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual DIAGNOSTICS SECTION BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS) MSA5TCD98L21365
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L21365 documenatation <<
Text preview - extract from the document
BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS) [T3A3] 6-2b
3. Combination Meter
3. Combination Meter 2) Measure resistance of harness connector
between combination meter and chassis ground.
A: DIAGNOSTICS PROCEDURE Connector & terminal
If speedometer does not operate, or operates (i12) No. 1 (+) -- Chassis ground (-):
abnormally, check combination meter circuit.
CAUTION:
Make sure that trouble code of vehicle speed
sensor 2 system appears in electrical system
on-board diagnosis.
3A1 : CHECK POWER SUPPLY FOR COM-
BINATION METER.
1) Remove combination meter. B6M0252B
2) Turn ignition switch to ON.
3) Measure voltage at combination meter connec- : Is the voltage less than 10 ?
tor terminal.
: Go to step 3A3.
Connector & terminal
: Repair wiring harness.
(i14) No. 11 (+) -- Chassis ground (-):
3A3 : CHECK HARNESS CONNECTOR
BETWEEN COMBINATION METER
AND VEHICLE SPEED SENSOR 2.
1) Disconnect connector from vehicle speed sen-
sor 2.
2) Measure resistance of harness connector
between vehicle speed sensor 2 and combination
meter.
B6M0530A
Connector & terminal
(B17) No. 1 -- (i11) No. 2:
: Is the voltage more than 10 V?
: Go to step 3A2.
: Repair wiring harness.
3A2 : CHECK GROUND CIRCUIT OF COM-
BINATION METER.
1) Turn ignition switch to OFF.
B6M0294B
: Is the resistance less than 10 ?
: Go to step 3A4.
: Repair wiring harness. Go to step 3A4.
11
6-2b [T3A4] BODY ELECTRICAL SYSTEM (ELECTRICAL PARTS)
3. Combination Meter
3A4 : CHECK HARNESS CONNECTOR : Is the resistance between 350 and
BETWEEN COMBINATION METER 450 ?
AND VEHICLE SPEED SENSOR 2. : Go to step 3A6.
: Replace vehicle speed sensor 2.
Measure resistance of harness connector between
vehicle speed sensor 2 and combination meter. 3A6 : CHECK VEHICLE SPEED SENSOR 2.
Connector & terminal
(B17) No. 2 -- (i11) No. 3: 1) Set the vehicle on free roller, or lift-up the
vehicle and support with safety stands.
WARNING:
Be careful not to be caught up by the running
wheels.
2) Drive the vehicle at speed greater than 20 km/h
(12 MPH).
3) Measure voltage between terminals of vehicle
speed sensor 2.
Terminals
B6M0294B
No. 1 -- No. 2:
: Is the resistance less than 10 ?
: Go to step 3A5.
: Repair wiring harness.
3A5 : CHECK VEHICLE SPEED SENSOR 2.
NOTE:
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo