Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION CLUTCH MSA5TCD98L20958

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20958 documenatation <<

Text preview - extract from the document

2-10    [W3A1]                         SERVICE PROCEDURE
3. Release Bearing and Lever


3. Release Bearing and Lever                            5) Remove release lever retainer spring from
                                                        release lever pivot with a screwdriver by accessing
A: REMOVAL                                              it through clutch housing release lever hole. Then
                                                        remove release lever.
1. MECHANICAL APPLICATION TYPE
1) Remove transmission assembly from vehicle
body.

2) Remove release lever return spring (Models
without hill holder only).
3) Remove the two clips from clutch release lever
and remove release bearing.
CAUTION:
Be careful not to deform clips.
                                                                                               B2M0174A
4) Remove release lever seal.
                                                        2. HYDRAULIC APPLICATION TYPE
                                                        1) Remove transmission assembly from vehicle
                                                        body.
                                                        
                                                        2) Remove operating cylinder.
                                                        
                                                        3) Remove the two clips from clutch release lever
                                                        and remove release bearing.
                                                        CAUTION:
                                                        Be careful not to deform clips.
                                                        4) Remove release lever seal.




                                       B2M0633D


   (A)   Release lever return spring
   (B)   Clip
   (C)   Release lever
   (D)   Release lever seal
   (E)   Retainer spring
   (F)   Clutch release lever




                                                                                               B2M1257G

                                                           (A)   Operating cylinder
                                                           (B)   Clip
                                                           (C)   Clutch release lever
                                                           (D)   Release bearing
                                                           (E)   Release lever seal


                                                    8
                                     SERVICE PROCEDURE                                       [W3C0] 2-10
                                                                                3. Release Bearing and Lever


5) Remove release lever retainer spring from              3) Check wear and damage of bearing case sur-
release lever pivot with a screwdriver by accessing       face contacting with lever.
it through clutch housing release lever hole. Then
remove release lever.                                     2. RELEASE LEVER
                                                          1) Check lever pivot portion and the point of con-
                                                          tact with release bearing case for wear.




                                       B2M1258A


                                                                                                 G2M0241
B: INSPECTION
1. RELEASE BEARING
                                                          C: INSTALLATION
CAUTION:
Since this bearing is grease sealed and is of a           CAUTION:
nonlubrication type, do not wash with gasoline            Before or during assembling, lubricate the fol-
or any solvent when servicing the clutch.                 lowing points with a light coat of grease.
1) Check the bearing for smooth movement by               

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo