Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION CLUTCH MSA5TCD98L20961

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20961 documenatation <<

Text preview - extract from the document

2-10    [W6A0]                          SERVICE PROCEDURE
6. Master Cylinder and Reservoir Tank


6. Master Cylinder and                                   2) Remove oil seal.
Reservoir Tank
A: REMOVAL
1) Thoroughly drain brake fluid from reservoir
tank.
2) Remove snap pin, clevis pin and separate push
rod of master cylinder from clutch pedal.


                                                                                               S2M0357A

                                                         3) Move the cylinder boot backward.




                                         B4M1189A

3) Remove clutch pipe from master cylinder.
4) Remove master cylinder with reservoir tank.
CAUTION:
Be extremely careful not to spill brake fluid.                                                 S2M0358A

Brake fluid spilt on the vehicle body will harm
                                                         4) Remove snap ring.
the paint surface; wipe it off quickly if spilt.
                                                         CAUTION:
                                                         Be careful when removing the snap ring to pre-
                                                         vent the rod, washer, piston and return spring
                                                         from flying out.
                                                         5) Remove damper cylinder from master cylinder
                                                         body.




                                         S2M0352A



B: DISASSEMBLY
1) Remove straight pin and reservoir tank.

                                                                                               S2M0359A




                                         S2M0356A




                                                    16
                                      SERVICE PROCEDURE                                            [W6E0] 2-10
                                                                             6. Master Cylinder and Reservoir Tank


C: INSPECTION                                               E: INSTALLATION
If any damage, deformation, wear, swelling, rust or         1) Install master cylinder to body, and install clutch
other faults are found on the cylinder, piston, push        pipe to master cylinder.
rod, fluid reservoir, return spring and gasket,             CAUTION:
replace the faulty part.                                    Check that pipe is routed properly.
                                                            Tightening torque:
                                                                T: 18

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo