Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD98L20842

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20842 documenatation <<

Text preview - extract from the document

2-1  [W12A0]                          SERVICE PROCEDURE
12. Main Fuel Level Sensor (2200 cc AWD except Taiwan Spec. Vehicles and 2500 cc Model)


4) Connect connector to vent control solenoid            12. Main Fuel Level Sensor
valve.
                                                         (2200 cc AWD except Taiwan
                                                         Spec. Vehicles and 2500 cc
                                                         Model)
                                                         A: REMOVAL
                                                         1) Release fuel pressure. 
                                                         2) Open fuel flap lid, and remove fuel filler cap.


                                         B2M0964

5) Connect two hoses to air filter.




                                                                                                  B2M1746

                                                         3) Disconnect battery ground cable.


                                        B2M1888A

6) Install canister. 




                                                                                                  B2M1723

                                                         4) Disconnect fuel delivery hose (A), return hose
                                                         (B) and jet pump hose (C).

                                         B2M1780

7) Lower the vehicle.
8) Connect battery ground cable.




                                                                                                 B2M0954E




                                         B2M1723




                                                    18
                                    SERVICE PROCEDURE                                       [W12B0] 2-1
                   12. Main Fuel Level Sensor (2200 cc AWD except Taiwan Spec. Vehicles and 2500 cc Model)


5) Remove nuts which install fuel pump assembly         9) Remove No. 2 and No. 3 terminals from sensor
onto fuel tank.                                         connector.




                                       B2M0955                                                 S2M0147A

6) Take off fuel pump assembly from fuel tank.          10) Separate harness.




                                       B2M0956                                                 S2M0148A

7) Disconnect connector from fuel pump bracket.         11) Remove screw which installs fuel level sensor
                                                        on mounting bracket.




                                       S2M0145
                                                                                                S2M0149
8) Remove spiral cable from wire harness.

                                                        B: INSTALLATION
                                                        CAUTION:
                                                        Leave fuel filler cap open when tightening nuts,
                                                        to prevent fuel from flowing out through fuel
                                                        delivery and return pipes. Close fuel filler cap
                                                        after tightening nuts.
                                                        Installation is in the reverse order of removal. Do
                                                        the following:
                                       S2M0146




                                                   19
2-1   [W13A1]                          SERVICE PROCEDURE
13. Air Filter (2200 cc AWD except Taiwan Spec. Vehicles and 2500 cc Model)


(1) Install the fuel level sensor by inserting its pawl        13. Air Filter (2200 cc AWD
into the cutout area of the mounting bracket.
                                                               except Taiwan Spec. Vehicles
                                                               and 2500 cc Model)
                                                               A: REMOVAL AND INSTALLATION
                                                               1. 2200 cc AWD EXCEPT TAIWAN SPEC.
                                                               VEHICLES
                                                               1) Disconnect battery ground cable.


                                          S2M0150A

(2) Always use new gaskets.
(3) Ensure sealing portion is free from fuel or for-
eign particles before installation.
(4) Tighten nuts in alphabetical sequence shown
in figure to specified torque.
Tightening torque:
    4.4

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo