Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD98L20832

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20832 documenatation <<

Text preview - extract from the document

2-1   [W2A0]                       SERVICE PROCEDURE
2. Rear Catalytic Converter


7) Connect front oxygen sensor connector.          2. Rear Catalytic Converter
                                                   A: REMOVAL
                                                   1) Disconnect battery ground cable.




                                     S2M0127

8) Connect battery ground cable.

                                                                                          B2M1723

                                                   2) Lift-up the vehicle.
                                                   3) Disconnect rear oxygen sensor connector.
                                                   (Except California spec. vehicles)




                                     B2M1723




                                                                                          B2M0312

                                                   4) Separate center exhaust pipe and rear catalytic
                                                   converter assembly from rear exhaust pipe.




                                                                                          B2M0055




                                               4
                                     SERVICE PROCEDURE                                         [W2B0] 2-1
                                                                                   2. Rear Catalytic Converter


5) Separate center exhaust pipe and rear catalytic       2) Install center exhaust pipe to front catalytic con-
converter assembly from front catalytic converter.       verter.
                                                         Tightening torque:
                                                             35

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo