Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION ENGINE (SOHC) MSA5TCD98L20867

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20867 documenatation <<

Text preview - extract from the document

2-3a    [W5A1]                       SERVICE PROCEDURE
5. Cylinder Head


5. Cylinder Head                                         6) Remove connector bracket attaching bolt.
                                                         7) Remove crankshaft position sensor and cam-
A: REMOVAL                                               shaft position sensor.
1. RELATED PARTS                                         8) Disconnect oil pressure switch connector.
                                                         9) Disconnect blow-by hose.
1)   Release fuel pressure.         10) Remove EGR pipe. (AT vehicles only)
2)   Drain engine coolant.          11) Remove intake manifold. 
4)   Remove alternator and bracket.                      12) Remove engine coolant pipe.
5)   Disconnect spark plug cords.
2. CYLINDER HEAD




                                                                                                    B2M0119G


(1) Cylinder head bolt               (2) Cylinder head                   (3) Cylinder head gasket

1) Remove timing belt, camshaft sprocket and
related parts.

2) Remove oil level gauge guide attaching bolt
(left hand only) and oil level gauge guide.




                                                    34
                                   SERVICE PROCEDURE                                       [W5A2] 2-3a
                                                                                          5. Cylinder Head


3) Remove cylinder head bolts in alphabetical           6) Remove cylinder head gasket.
sequence shown in Figure.                               CAUTION:
CAUTION:                                                Do not scratch the mating surface of cylinder
Leave bolts (a) and (c) engaged by three or four        head and cylinder block.
threads to prevent cylinder head from falling.
                                                        7) Similarly, remove right side cylinder head.




                                     B2M0120D

4) While tapping cylinder head with a plastic
hammer, separate it from cylinder block.
5) Remove bolts (a) and (b) to remove cylinder
head.




                                     B2M0120D




                                                   35
2-3a    [W5B0]                    SERVICE PROCEDURE
5. Cylinder Head


B: DISASSEMBLY




                                                                                                 H2M1541E


(1) Rocker cover                  (3) Camshaft support                 (5) Oil seal
(2) Valve rocker ASSY             (4) Camshaft

1) Remove rocker cover.                               5) Set ST on valve spring. Compress valve spring
2) Remove valve rocker assembly.                                               each valve and valve spring.
3) Remove camshaft and support.                                               CAUTION:
4) Place cylinder head on ST.                         

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo