Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION ENGINE COOLING SYSTEM MSA5TCD98L20898
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L20898 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W1B0] 2-5
1. On-car Service
1. On-car Service 2) Fill engine coolant into radiator up to filler neck
position.
A: DRAINING OF ENGINE
COOLANT
1) Lift-up the vehicle.
2) Fit vinyl tube to drain pipe.
B2M0135
3) Fill engine coolant into reservoir tank up to
upper level.
B2M0133A
3) Loosen drain cock to drain engine coolant into
container.
NOTE:
Remove radiator cap so that engine coolant will
drain faster.
B2M0140
4) Attach radiator cap and reservoir tank cap prop-
erly.
5) Install air vent plug.
6) Warm-up engine completely for more than five
minutes at 2,000 to 3,000 rpm.
7) Stop engine and wait until temperature drops to
B2M0015A
a safe level.
8) If engine coolant level drops in radiator, add
engine coolant to filler neck position.
B: FILLING OF ENGINE COOLANT 9) If engine coolant level drops from upper level of
reservoir tank, add engine coolant to upper level.
1) Remove air vent plug from radiator.
10) Attach radiator cap and reservoir tank cap
properly.
B2M0301
7
2-5 [W1C0] SERVICE PROCEDURE
2. Water Pump
C: CHECKING OF COOLING 2. Water Pump
SYSTEM
A: REMOVAL
1) Remove radiator cap, top off radiator, and
attach tester to radiator in place of cap. 1) Disconnect ground cable from the battery.
B2M0136 G6M0095
2) Apply a pressure of 157 kPa (1.6 kg/cm2, 23 2) Lift-up the vehicle.
psi) to radiator to check if: 3) Remove under cover.
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or
connections.
CAUTION:
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo