Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION EXHAUST SYSTEM MSA5TCD98L20949

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20949 documenatation <<

Text preview - extract from the document

                                   SERVICE PROCEDURE                                   [W2A0] 2-9
                                                                               2. Center Exhaust Pipe


7) Connect front oxygen sensor connector.          2. Center Exhaust Pipe
                                                   A: REMOVAL
                                                   1) Disconnect battery ground cable.




                                     S2M0127

8) Connect battery ground cable.

                                                                                          B2M1723

                                                   2) Lift-up the vehicle.
                                                   3) Disconnect rear oxygen sensor connector.
                                                   (Except California spec. vehicles)




                                     B2M1723




                                                                                          B2M0312

                                                   4) Separate center exhaust pipe and rear catalytic
                                                   converter assembly from rear exhaust pipe.




                                                                                          B2M0055




                                               7
2-9   [W2B0]                         SERVICE PROCEDURE
2. Center Exhaust Pipe


5) Separate center exhaust pipe and rear catalytic       2) Temporarily tighten bolt which installs center
converter assembly from front catalytic converter.       exhaust pipe to hanger bracket.




                                       S2M0052                                                      B2M0313

6) Remove center exhaust pipe and rear catalytic         3) Install center exhaust pipe to front catalytic con-
converter assembly from hanger bracket.                  verter.
CAUTION:                                                 Tightening torque:

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo