Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ENGINE SECTION FUEL INJECTION SYSTEM MSA5TCD98L20930

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L20930 documenatation <<

Text preview - extract from the document

                                  SERVICE PROCEDURE                                      [W19A2] 2-7
                                                                                       19. Knock Sensor


19. Knock Sensor                                       4) Remove knock sensor from cylinder block.

A: REMOVAL
1. 2200 cc MODEL
1) Disconnect battery ground cable from battery
ground terminal.




                                                                                             B2M1682



                                                       2. 2500 cc MODEL
                                                       1) Disconnect battery ground cable from battery
                                                       ground terminal.
                                        B2M1723

2) Remove air intake chamber.





                                                                                             G6M0095

                                                       2) Remove air intake chamber.
                                                       
                                        B2M1679

3) Disconnect knock sensor connector.




                                                                                             B2M1683

                                                       3) Remove operating cylinder. (MT vehicle only)
                                        B2M1681        




                                                                                            B2M1179D



                                                  39
2-7   [W19B1]                          SERVICE PROCEDURE
19. Knock Sensor


NOTE:                                                        B: INSTALLATION
Place the operating cylinder where it will not inter-
fere with the work in process.                               1. 2200 cc MODEL
                                                             1) Install knock sensor to cylinder block.
                                                             Tightening torque:
                                                                 23.5

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo