Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD98L21299

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21299 documenatation <<

Text preview - extract from the document

                                          SERVICE PROCEDURE                                         [W18A2] 6-2
                                                                                               18. Power Door Lock




                                                                                                           B6M0712A


3. POWER WINDOW MOTOR                                           18. Power Door Lock
1) Make sure that power window motor rotates
properly when battery voltage is applied to termi-              A: REMOVAL AND INSTALLATION
nals of motor connector.                                        1. FRONT AND REAR DOOR, AND REAR
2) Change polarity of battery connections to termi-             GATE LOCK ACTUATOR
nals to ensure that motor rotates in reverse direc-
tion.                                                           Remove and install front door lock actuator, rear
                                                                door lock actuators, and rear gate lock actuator.
4. POWER WINDOW RELAY                                           
Check continuity between terminals as indicated in              NOTE:
table, when connecting the battery to terminal No.              To remove and install the actuators, it is necessary
1 and No. 3.                                                    to disassemble the door component parts.
When current flows.     Between termi-   Continuity             2. DOOR LOCK TIMER
                        nals No. 2 and   exists.
                        No. 4
                                                                1) Disconnect battery ground cable.
When current does not   Between termi-   Continuity does
flow.                   nals No. 2 and   not exist.
                        No. 4
                        Between termi-   Continuity
                        nals No. 1 and   exists.
                        No. 3




                                                                                                         G6M0095




                                                           33
6-2   [W18B1]                         SERVICE PROCEDURE
18. Power Door Lock


2) Remove lower cover and then disconnect con-             2) Set switch to each position and check continu-
nector.                                                    ity between terminals.




                                        B3M0377A

3) Remove door lock timer (A) while disconnecting
connector.




                                                                                                  B6M0839A



                                        B6M0683C
                                                           2. ACTUATOR
                                                           1) Remove door trim panel. 
4) Installation is in the reverse order of removal.        2) Disconnect connector of actuator.
Tightening torque:                                         3) Make sure that door link moves to LOCK or
    7.4

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo