Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD98L21300
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L21300 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W19B1] 6-2
19. Remote Controlled Rearview Mirror
19. Remote Controlled 3. MIRROR PLATE
Rearview Mirror 1) Remove rearview mirror.
A: REMOVAL AND INSTALLATION 2) Warm around the mirror holder by hair dryer.
1. REMOTE CONTROLLED REARVIEW CAUTION:
MIRROR SWITCH The mirror holder will become extremely hot.
1) Remove rearview mirror switch from instrument Avoid carelessly touching it.
panel by using a small standard screwdriver.
CAUTION:
Do not pry rearview mirror switch forcefully as
this may scratch instrument panel.
B6M0826A
3) Remove mirror plate while lifting the mirror
holder using a flat bladed screwdriver.
B6M0352A
NOTE:
When removing mirror plate in vehicles with mirror
2) Remove rearview mirror switch while discon- heater, disconnect mirror connector which is on the
necting connector. back side.
3) Installation is in the reverse order of removal.
2. REARVIEW MIRROR
1) Remove door trim panel.
2) Disconnect connector of rearview mirror.
3) Remove screws which secure rearview mirror,
and then remove rearview mirror.
B6M0827
4) Installation is in the reverse order of removal.
B: INSPECTION
1. REARVIEW MIRROR SWITCH
B6M0137 Move rearview mirror switch to each position and
check continuity between terminals.
4) Installation is in the reverse order of removal.
35
6-2 [W19B2] SERVICE PROCEDURE
19. Remote Controlled Rearview Mirror
B6M0714A
2. REARVIEW MIRROR
Check to ensure that rearview mirror moves prop-
erly when battery voltage is applied to terminals.
Operation Terminal connection
(+) (-)
UP 3 1
DOWN 1 3
RIGHT 1 2
LEFT 2 1
B6M0140
36
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo