Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD98L21301

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21301 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                       [W20B1] 6-2
                                                                                                20. Sunroof


20. Sunroof                                                B: INSPECTION
A: REMOVAL AND INSTALLATION                                1. SUNROOF SWITCH
1. SUNROOF AND SUNROOF MOTOR                               Set sunroof switch to each position and check con-
                                                           tinuity between terminals as indicated in table
 as for removal and instal-          below:
lation of sunroof system.
2. SUNROOF SWITCH
NOTE:
The sunroof switch is installed in spot light body.
1) Pry spot light lens off using a screwdriver.
2) Remove screws which secure spot light body.
3) Remove spot light body while disconnecting
connectors.
4) Remove screw which secures sunroof switch,
                                                                                                 B6M0142A
and then remove sunroof switch.




                                        B6M0141A

5) Installation is in the reverse order of removal.




                                                                                                 B6M0861A




                                                      37
6-2   [W20B2]                      SERVICE PROCEDURE
20. Sunroof


2. SUNROOF MOTOR                                        3. SUNROOF RELAY
1) Apply battery voltage between 1-pin connector        Check continuity between terminals as indicated in
(Except OUTBACK) or terminal No. 1 (OUTBACK)            table below, when battery voltage is applied
and body ground wire.                                   between terminals No. 1 and No. 2.
2) Make sure that sunroof motor moves when con-
                                                        When current     Between terminals   Continuity exists.
necting terminals as described below:
                                                        flows.           No. 3 and No. 4
Except OUTBACK
                                                        When current     Between terminals   Continuity does not

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo