Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD98L21302
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L21302 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W21A5] 6-2
21. Radio, Speaker and Antenna
21. Radio, Speaker and 4) Remove screws which secure the speaker.
5) Remove door mount speaker.
Antenna
A: REMOVAL AND INSTALLATION
1. RADIO BODY
1) Remove hand brake cover.
2) Remove console cover.
3) Remove screws which secure center panel,
and remove center panel.
B6M0162
6) Installation is in the reverse order of removal.
3. REAR SPEAKER (SEDAN)
1) Remove rear seat cushion and rear backrest.
2) Remove left and right rear quarter trim panels.
3) Remove rear shelf trim panel.
4) Remove screws which secure speaker.
B6M0354
5) Remove speaker while disconnecting connec-
4) Remove fitting screws, and slightly pull radio tor from speaker.
out of instrument panel. 6) Installation is in the reverse order of removal.
4. REAR SPEAKER (WAGON)
1) Remove door trim panel.
2) Disconnect connector from speaker.
3) Remove screws which secure the speaker.
4) Remove speaker.
5) Installation is in the reverse order of removal.
5. POWER ANTENNA
1) Remove left side trunk trim (SEDAN), or left
B6M0355 side rear lower quarter trim (WAGON).
5) Disconnect connectors and antenna feeder 2) Remove special nut (SEDAN).
cord. 3) Remove bolt which secures power antenna.
6) Installation is in the reverse order of removal. 4) Remove power antenna while disconnecting
connector and water drain hose.
2. FRONT SPEAKER
1) Remove gusset speaker from behind the rear-
view mirror while disconnecting connector.
B6M0147A
5) Installation is in the reverse order of removal.
B6M0146
2) Remove door trim panel.
3) Disconnect connector from speaker.
39
6-2 [W21B1] SERVICE PROCEDURE
21. Radio, Speaker and Antenna
B: INSPECTION
1. POWER ANTENNA
1) Connect battery positive (+) terminal to terminal
No. 3 and connect terminal No. 1 (SEDAN) or No.
6 (WAGON) to ground. Ensure that antenna rod
extends properly when battery positive (+) terminal
is connected to terminal No. 2 (SEDAN) or No. 4
(WAGON).
2) Ensure that antenna rod retracts properly when
battery positive (+) terminal is disconnected from
terminal No. 2 (SEDAN) or No. 4 (WAGON).
B6M0149A
40
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo