Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD98L21173

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21173 documenatation <<

Text preview - extract from the document

                                     SERVICE PROCEDURE                                          [W14B0] 4-7
                                                                                            14. Evaporator Unit


14. Evaporator Unit                                        B: DISASSEMBLY AND ASSEMBLY
A: REMOVAL AND INSTALLATION                                1) Remove resistor assembly and remove six
                                                           screws from evaporator case.
1) Disconnect battery negative terminal.
2) Discharge refrigerant using refrigerant recovery
system. 
3) Disconnect discharge pipe, suction pipe and
grommets




                                                                                                   B4M0099B

                                                              (1)   Resistor ASSY

                                                           2) Remove thermostat (a) from upper case. (Ther-
                                                           mistor (b) is inserted into specified evaporator fin
                                        G4M0641
                                                           position.) When installing thermostat, be sure to
4) Remove glove box and pocket back panel.                 insert thermistor into specified fin position.





                                                                                                   B4M0100C

                                        B5M0025
                                                           3) Disconnect the connection between the expan-
5) Disconnect the harness connector from evapo-            sion valve and pipe from receiver drier.
rator.                                                     4) Remove the expansion valve from pipes.
6) Disconnect drain hose.
7) Remove evaporator mounting bolt and nut.




                                                                                                   B4M0101A

                                                           5) To install expansion valve, reverse removal pro-
                                        G4M0642
                                                           cedures. Properly wrap capillary tube of expansion
8) Install the evaporator in the reverse order of          valve with seal.
removal.                                                   6) Check to see if the evaporator fins are clogged.
9) Charge refrigerant.                If they are, clean them with compressed air.
                                                           CAUTION:
                                                           Water must never be used to clean the evapo-
                                                           rator.

                                                      29

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo