Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD98L21121

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21121 documenatation <<

Text preview - extract from the document

4-4  [W4D1]                            SERVICE PROCEDURE
5. Master Cylinder


D: ADJUSTMENT                                                5. Master Cylinder
1. SHOE CLEARANCE                                            A: REMOVAL
1) Remove adjusting hole cover from back plate.              1) Thoroughly drain brake fluid from reservoir
2) Turn adjusting screw using a slot-type screw-             tank.
driver until brake shoe is in close contact with disc        2) Disconnect fluid level indicator harness connec-
rotor.                                                       tor.
                                                             3) Remove brake pipes from master cylinder.
                                                             4) Remove master cylinder mounting nuts, and
                                                             take out master cylinder from brake booster.
                                                             CAUTION:
                                                             Be extremely careful not to spill brake fluid.
                                                             Brake fluid spilt on the vehicle body will harm
                                                             the painted surface; wipe it off quickly if spilt.
                                                             B: DISASSEMBLY
                                                             1. PRECAUTIONS FOR DISASSEMBLING
                                          G4M0416
                                                             1) Remove mud and dirt from the surface of brake
3) Turn back (downward) adjusting screw 3 or 4               master cylinder.
notches.                                                     2) Prepare tools necessary for disassembly
4) Install adjusting hole cover to back plate.               operation, and arrange them neatly on work bench.
2. LEVER STROKE                                              3) Clean work bench.

1) Remove console box lid.                                   2. DISASSEMBLING PROCEDURE
2) Forcibly pull parking brake lever 3 to 5 times.           1) Remove reserve tank.
3) Adjust parking brake lever by turning adjusting           2) Remove cylinder pin. (only vehicle equipped
nut until parking brake lever stroke is set at 7 to 8        with ABS)
notches with operating force of 196 N (20 kg, 44
lb).




                                                                                                    S4M0123A

                                         B4M0050A            3) Pry up the pawl and remove the piston retainer.
4) Tighten lock nut.                                         NOTE:
5) Install console box lid.                                  Piston may jump out from master cylinder.
Lever stroke:
    7 to 8 notches when pulled with a force
    of 196 N (20 kg, 44 lb)
Tightening torque (Lock nut):
    5.9

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo