Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD98L21122

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD98L21122


>> Download MSA5TCD98L21122 documenatation <<

Text preview - extract from the document
4-4   [W6A0]                          SERVICE PROCEDURE
6. Brake Booster


6. Brake Booster                                            4) Do not change the push rod length. If it has
                                                            been changed, reset the projected length "L" to the
A: REMOVAL                                                  standard length.
1) Remove or disconnect the following parts at              Standard:
engine compartment.                                             L = 10 mm (0.39 in)
   (1) Disconnect connector for brake fluid level
   indicator.
   (2) Remove brake pipes from master cylinder.
   (3) Remove master cylinder installing nuts.
   (4) Disconnect vacuum hose from brake
   booster.
2) Remove the following parts from the pedal
bracket.
   (1) Snap pin and clevis pin
   (2) Four brake booster installing nuts
3) Remove brake booster while shunning brake                                                        G4M0424
pipes.

B: HANDLING PRECAUTIONS                                     C: INSTALLATION
1) Be careful not to drop brake booster. Brake              1) Mount brake booster in position.
booster should be discarded if it has been                  2) Connect operating rod to brake pedal with cle-
dropped.                                                    vis pin and snap pin.
2) Use special care when handling operating rod.
If excessive force is applied to operating rod, suf-
ficient to cause a change in the angle in excess of



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo