Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual MECHANICAL COMPONENTS SECTION HEATER AND VENTILATOR MSA5TCD98L21153

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21153 documenatation <<

Text preview - extract from the document

4-6    [W4C0]                         SERVICE PROCEDURE
5. Intake Door Motor


C: ADJUSTMENT                                               5. Intake Door Motor
1) Operate temperature control lever to "FULL               A: REMOVAL AND INSTALLATION
COLD" position.
2) Install control cable to lever (A). While pushing        1) Disconnect GND cable from battery.
                                                            2) Remove glove box and pocket back panel.
outer cable, secure control cable with clip (B).
                                                            




                                        B4M0062C
                                                                                                     B5M0025

                                                            3) Remove heater duct or evaporator. (With A/C
                                                            model). 
                                                            4) Remove intake unit from the vehicle.




                                                                                                     G4M0561

                                                            5) Remove screws which secure intake door
                                                            motor to intake unit.
                                                            NOTE:
                                                            Ensure that RECIRC switch is set to "ON".




                                                                                                     G4M0562

                                                            6) Installation is in the reverse order of removal.




                                                       10
                                     SERVICE PROCEDURE                                       [W5B0] 4-6
                                                                                      5. Intake Door Motor


B: INSPECTION
1) When approx. 12 V is applied to the intake door motor terminals, intake door motor operates as follows:




                                                                                                  B4M1091A


2) Connect harness to intake door motor.                3) Turn ignition switch to "ACC" and RECIRC
                                                        switch to"ON" then, set to "RECIRC".
                                                        NOTE:
                                                        Ensure that intake door motor is set in the
                                                        "RECIRC" mode.
                                                        4) Install intake door motor on intake unit.
                                                        5) Secure rod holder to link, and install link to
                                                        intake unit.
                                                        6) Manually set rod in the "RECIRC" mode, and
                                                        secure to rod holder.
                                                        7) Operate mode selector switch to ensure that
                                                        system changes from intake air to "RECIRC" and
                                                        from "RECIRC" to intake air in full-stroke range.




                                                                                               G4M0564




                                                   11

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo