Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual MECHANICAL COMPONENTS SECTION WHEELS AND AXLES MSA5TCD98L21082
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L21082 documenatation <<
Text preview - extract from the document
4-2 [W4A1] SERVICE PROCEDURE
4. Front and Rear Drive Shafts
4. Front and Rear Drive Shafts 2. REAR DRIVE SHAFT
1) Disconnect ground cable from battery.
A: REMOVAL 2) Lift-up vehicle, and remove rear wheel cap and
1. FRONT DRIVE SHAFT wheels.
1) Disconnect ground cable from battery. CAUTION:
2) Jack-up vehicle, support it with safety stands Be sure to loosen and retighten axle nut after
(rigid racks), and remove front wheel cap and removing wheel from vehicle. Failure to follow
wheels. this rule may damage wheel bearings.
3) Unlock axle nut. 3) Unlock axle nut.
4) While depressing brake pedal, remove axle nut 4) Loosen axle nut using a socket wrench.
using a socket wrench.
CAUTION:
CAUTION: Do not remove axle nut.
Be sure to loosen and retighten axle nut after
removing wheel from vehicle. Failure to follow 5) Remove ABS sensor clamps and parking brake
this rule may damage wheel bearings. cable bracket.
6) Remove bolts which secure lateral link assem-
5) Disconnect stabilizer link from transverse link. bly to rear housing.
6) Disconnect transverse link from housing.
7) Remove spring pin which secures transmission CAUTION:
spindle to DOJ/SFJ. Discard old self-locking nut. Replace with a
new one.
CAUTION:
Use a new spring pin. 7) Remove bolts which secure trailing link assem-
bly to rear housing.
CAUTION:
Discard old self-locking nut. Replace with a
new one.
8) Remove crossmember reinforcement lower
from crossmember (4 door model only).
9) Remove DOJ from rear differential using ST.
(Except 2200 cc AT vehicles)
ST 28099PA100 DRIVE SHAFT REMOVER
G4M0279 CAUTION:
Do not remove circlip attached to inside of dif-
8) Remove front drive shaft assembly. If it is hard ferential.
to remove, use ST1 and ST2.
ST1 926470000 AXLE SHAFT PULLER
ST2 927140000 PLATE
CAUTION:
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo