Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD98L21026
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD98L21026 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W17B0] 3-2
17. Reverse Clutch
17. Reverse Clutch
A: DISASSEMBLY
B3M0591A
(1) Reverse clutch drum (6) Spring retainer (11) Retaining plate
(2) Lip seal (7) Snap ring (12) Snap ring
(3) Reverse clutch piston (8) Dish plate (13) High clutch drum
(4) Lathe cut seal ring (9) Driven plate
(5) Spring (10) Drive plate
1) Remove the snap ring, and take out the retain- B: INSPECTION
ing plate, drive plates, driven plates, and dish
plate. 1) Drive plate facing for wear and damage
2) Using the ST1, ST2 and ST3, remove the snap 2) Snap ring for wear, return spring for breakage
ring and take out the spring retainer and springs. or setting, and spring retainer for deformation
ST1 398673600 COMPRESSOR 3) Lip seal and lathe cut seal ring for damage
ST2 398177700 INSTALLER 4) Piston check ball for operation
ST3 399893600 PLIERS
3) Take out the piston by applying compressed air.
87
3-2 [W17C0] SERVICE PROCEDURE
17. Reverse Clutch
C: ASSEMBLY
B3M0591B
(1) Reverse clutch drum (6) Spring retainer (11) Retaining plate
(2) Lip seal (7) Snap ring (12) Snap ring
(3) Reverse clutch piston (8) Dish plate (13) High clutch drum
(4) Lathe cut seal ring (9) Driven plate
(5) Spring (10) Drive plate
1) Using the ST1, ST2 and ST3 as those used in Available retaining plates
disassembling, assemble piston the springs, spring Part No. Thickness mm (in)
retainer and snap ring. 31567AA350 4.6 (0.181)
ST1 398673600] COMPRESSOR 31567AA360 4.8 (0.189)
ST2 398177700 INSTALLER 31567AA370 5.0 (0.197)
ST3 399893600 PLIERS 31567AA380 5.2 (0.205)
2) Assemble the dish plate, driven plates, drive 31567AA390 5.4 (0.213)
plates and retaining plate in that order and attach 31567AA400 5.6 (0.220)
the snap ring.
NOTE:
Pay attention to the orientation of the dish plate.
3) Checking operation:
Apply compressed air intermittently to the oil hole,
and check the reverse clutch for smooth operation.
4) Measuring clearance (Retaining plate selec-
tion):
NOTE:
Before measuring clearance, place the same thick-
ness of shim on both sides to prevent retaining
plate from tilting.
Standard value:
0.5 -- 0.8 mm (0.020 -- 0.031 in)
Allowable limit:
1.2 mm (0.047 in)
88
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo