Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD98L21029

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21029 documenatation <<

Text preview - extract from the document

3-2  [W20A0]                               SERVICE PROCEDURE
20. One-way Clutch Outer Race


If the clearance is out of the specified range, select        20. One-way Clutch Outer Race
a proper retaining plate so that the standard clear-
ance can be obtained.                                         A: DISASSEMBLY
Standard value:                                               Remove the snap ring. Then remove the one-way
    1.0 -- 1.4 mm (0.039 -- 0.055 in)                         clutch (3-4).
Allowable limit:
    2.0 mm (0.079 in)
      Available retaining plates (Overrunning clutch)
         Part No.                   Thickness mm (in)
       31567AA120                       8.0 (0.315)
       31567AA130                       8.2 (0.323)
       31567AA140                       8.4 (0.331)
       31567AA150                       8.6 (0.339)
       31567AA160                       8.8 (0.346)
       31567AA170                       9.0 (0.354)
                                                                                                        G3M0911
       31567AA180                       9.2 (0.362)

9) Install the needle bearing, and secure with the
snap ring.                                                    B: INSPECTION
                                                              Check the sliding surface and one-way clutch (3-4)
                                                              for any harmful cuts, damage, or other faults.

                                                              C: ASSEMBLY
                                                              1) Assemble the one-way clutch (3-4), and secure
                                                              with the snap ring.
                                                              NOTE:
                                                              Pay attention to the orientation of the one-way
                                                              clutch (3-4).
                                              G3M0476         2) Assemble the rear internal gear, and secure the
                                                              outer race. Make sure that the internal gear is
10) Install the one-way clutch (1-2) and plate, and           locked in the clockwise direction, and free to rotate
secure with the snap ring.                                    in the counterclockwise direction.
NOTE:
Set the inner race. Make sure that the forward
clutch is free in the clockwise direction and locked
in the counterclockwise direction, as viewed from
the front of the vehicle.




                                                                                                        G3M0486




                                              G3M0484




                                                         94

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo