Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD98L21022

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD98L21022 documenatation <<

Text preview - extract from the document

SERVICE PROCEDURE [W13A1] 3-2
13. Reduction Drive Gear Assembly

(3) Rotate the shaft lightly by hand to engage 13. Reduction Drive Gear
the splines securely.
Dimension A:
Assembly
3.9 -- 4.1 mm (0.154 -- 0.161 in) A: DISASSEMBLY
1. FWD MODEL
1) Take out the seal rings.
CAUTION:
Be careful not to damage the seal rings.

B3M0632A

12) Fill ATF and differential gear oil.
NOTE:
After filling oil, insert the oil level gauge into the oil
inlet.
B3M0581A
Differential gear oil capacity:
1.1 -- 1.3 (1.2 -- 1.4 US qt, 1.0 -- 1.1 2) Take out the snap ring.
Imp qt)
CAUTION:
Automatic transmission fluid capacity: Be careful not to damage the splines.
2200 cc:
7.9 -- 8.2 (8.4 -- 8.7 US qt, 7.0 -- 7.2 3) Using a press and ST, remove the ball bearing
Imp qt) from shaft.
2500 cc: ST 49971700 REMOVER
9.5 -- 9.8 (10.0 -- 10.3 US qt, 8.4 -- 8.6
lmp qt)
Recommended fluid:
Dexron II or Dexron III type automatic
transmission

B3M0832A

4) Using a press, remove the reduction drive gear.

B3M0583A

75
3-2 [W13A2] SERVICE PROCEDURE
13. Reduction Drive Gear Assembly

5) Using a press, remove the ball bearing. 3) Using a press, remove the reduction drive gear.

G3M0441 G3M0440

4) Using a press, remove the ball bearing.
2. AWD MODEL
1) Take out the seal rings.
CAUTION:
Be careful not to damage the seal rings.

G3M0441

B: INSPECTION
G3M0438
Make sure that each component is free of harmful
gouges, cuts, or dust.
2) Take out the snap ring.
CAUTION:
C: ASSEMBLY
Be careful not to damage the splines. 1. FWD MODEL
1) Press-fit the ball bearing and reduction drive
gear to the shaft.

B3M0584F

B3M0585A

76
SERVICE PROCEDURE [W13C2] 3-2
13. Reduction Drive Gear Assembly

2) Press ball bearing into place and secure snap 2) Fit the snap ring securely in the snap ring
ring to groove in shaft. groove on the shaft.

B3M0582B B3M0584F

(A) Snap ring 3) Attach two seal rings.
(B) Ball bearing NOTE:
(C) Reduction drive shaft To make subsequent assembly easier, apply vase-
line to the grooves of the shaft and to the exterior
3) Attach two seal rings.
of the seal ring.
NOTE:
To make subsequent assembly easier, apply vase-
line to the grooves of the shaft and to the exterior
of the seal ring.

G3M0438

B3M0581A

2. AWD MODEL
1) Press-fit the ball bearing and reduction drive
gear to the shaft.

G3M0442

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo