Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1998 1998 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD98L21031

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD98L21031 documenatation <<

Text preview - extract from the document

3-2   [W22A0]                          SERVICE PROCEDURE
22. Differential Case Assembly


22. Differential Case Assembly                               C: ASSEMBLY
A: DISASSEMBLY                                               1) Install the washer, differential bevel gear and
                                                             differential bevel pinion in the differential case
1) Using a press and ST, remove the taper roller             (RH). Insert the pinion shaft, and fit the straight pin.
bearing.
ST 498077000 REMOVER                                         NOTE:
                                                             Install straight pin from reverse direction.
CAUTION:
Be careful not to damage the speedometer
drive gear.




                                                                                                         G3M0490

                                                             2) Install the washer and differential bevel gear to
                                          G3M0488            the differential case (LH). Then put the case over
                                                             the differential case (RH), and connect both cases.
2) Secure the case in a vise and remove the                  3) Install the crown gear and secure by tightening
crown gear tightening bolts, then separate the               the bolt.
crown gear, case (RH) and case (LH).
                                                             Standard tightening torque:
                                                                 62

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo